Corvette V8-5.7L VIN G (1997)
9. Install new cavity (1), whistle (2), and permagum (3) seals on the heater core coven
10. Install the heater core cover.
-
Tighten the heater core cover screws to 1.6 Nm (14 lb. in).
11. Install the heater/evaporator module into the vehicle. Refer to Heater/Evaporator Module Assembly
12. Connect the negative battery cable.
CAUTION: Refer to Battery Disconnect Caution.
13. Fill the cooling system.
14. Evacuate and recharge the A/C system. Refer to Evacuation and A/C Charging Using ACR4.