Corvette V8-5.7L VIN G (1997)
4. Insert the tool through the front of the engine block and to the bearing bore.
5. Install the bearing onto the expanding driver (4-8).
6. Tighten the expander assembly (15) nut until the tool is snug in the bearing.
NOTE: The camshaft bearing oil holes must align with the oil galleries in the engine block. When the camshaft bearing is properly aligned, the
seam in the bearing will be located at the 12 o'clock position (with the engine in an upright position). After installation of camshaft bearings,
inspect the camshaft bearing oil holes for proper alignment with the oil galleries. An improperly aligned camshaft bearing oil gallery hole will
restrict oil flow to the bearing and camshaft journal.
7. Align the oil lubrication hole in the bearing with the oil galleries in the engine block. When properly aligned, the seam in the camshaft bearing will
be located at the 12 o'clock position (with the engine in an upright position).
