Corvette V8-5.7L VIN G (1997)
14. Disconnect the fuel injector connectors.
15. Disconnect all the remaining electrical connections from the intake manifold.
16. Remove the intake manifold.
INSTALLATION
WARNING: The fuel rail stop bracket must be installed onto the intake manifold assembly. The stop bracket serves as a protective shield
for file fuel rail in the event of a vehicle frontal crash. If the fuel rail stop bracket is not installed and the vehicle is involved in a frontal
crash, fuel could be sprayed possibly causing a fire and personal injury from burns.
Intake Manifold Bolt Tightening Sequence
1. Install the intake manifold bolts and fuel rail stop bracket.
a. Tighten intake manifold bolts first pass in sequence to 5 Nm (44 inch lbs.).
b. Tighten intake manifold bolts final pass in sequence to 8 Nm (89 inch lbs.).
