Corvette V8-5.7L VIN G (1997)
5. Compress the valve spring (4) using a valve spring compressor (head on).
6. Remove the valve stem keys (2).
7. Release the valve spring compressor.
8. Remove the valve spring cap (3).
9. Remove the valve spring (4).
10. Remove the valve guide seal (5).
INSTALLATION
NOTE: The valve guide seal alignment and position on the valve guide is critical. An improperly installed valve guide seal may lead to excessive
oil consumption, increased vehicle emissions, or component damage.
1. Install the valve guide seal (5) onto the guide (7).
a. Lubricate the valve guide (7) and valve stem (5) oil seal with clean engine oil.
b. Install the valve guide seal onto the valve stem. Push the seal down until the seal contacts the valve guide.
c. Use the valve seal installer. Push or lightly tap the tool until the tool bottoms against the valve spring shim (6).
