Corvette V8-5.7L VIN G (1997)
14. Remove six water coolant retaining bolts from the engine block.
15. Remove the water pump.
INSTALLATION
1. Install the new water pump gaskets with the tabs up.
2. Install the water pump to the engine block.
3. Install the water pump bolts on the engine block. Tighten the water pump bolts to 41 Nm (30 ft. lbs.).
4. Install the water pump pulley.
5. Install the water pump pulley bolts.
a. Tighten the water pump pulley bolts a first pass evenly to 10 Nm (89 Nm inch lbs.).
b. Tighten the water pump pulley bolts a final pass to 25 Nm (18 ft. lbs.).