Corvette V8-5.7L VIN G (1997)
5. Install the heater core pipe screw (2).
6. Install the heater core mounting clip screw (1).
-
Tighten the heater core pipe screw to 1.6 Nm (14 lb. in).
-
Tighten the heater core mounting clip screw to 1.6 Nm (14 lb. in).
NOTICE: Refer to Fastener Notice in Service Precautions.
7. Install new cavity (1), whistle (2), and permagum (3) seals on the heater core coven
8. Install the heater core cover.
-
Tighten the heater core cover screws to 1.6 Nm (14 lb. in).
9. Install the heater/evaporator module into the vehicle. Refer to Heater/Evaporator Module Assembly.
10. Connect the negative battery cable.
CAUTION: Refer to Battery Disconnect Caution.
11. Fill the cooling system.
12. Evacuate and recharge the A/C system. Refer to Evacuation and A/C Charging Using ACR4.