Corvette V8-5.7L VIN G (1997)
26. Remove the upper RH floor air duct from the module.
CAUTION: Unplug the blower motor before removal. Blower motor case contact with any ground may start the fan and cause personal injury.
27. Disconnect the electrical connector (5) from the blower motor.
28. Remove the blower motor from the module. Refer to Blower Motor and Fan Assembly
29. Disconnect the vacuum source line connection (4) from the I/P harness.
30. Disconnect the electrical connector (2) from the temperature door control motor.
31. Remove the LH and RH rear floor air ducts from the module.
