Corvette V8-5.7L VIN G (1997)
5. Install the Connector Position Assurance (CPA) to the driver yellow 2-way connector located at the base of the steering column.
6. Install the sound insulator-LH.
7. Install the Sensing and Diagnostic Module (SDM) Fuse to the I/P fuse block.
8. Install the front floor kick-up panel.
9. Staying well away from both air bags, turn the ignition switch to the ON position.
9.1. The AIR BAG warning lamp will flash seven times.
9.2. The AIR BAG warning lamp will then turn OFF.
10. Perform the SIR Diagnostic System Check if the AIR BAG warning lamp does not operate as described.
