chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

73-83-15 > < Instruments - Fuel Gauge Responds Slowly After Fueling
Page 1
background image

Fuel Gauge: All Technical Service Bulletins
Instruments - Erratic Fuel Gauge Readings

File In Section: 8 - Chassis/Body Electrical 

Bulletin No.: 73-83-22

Date: October, 1997

Subject: 
Erratic Fuel Gauge Readings 
(Repair Pinched Wires)

Model:
1997 Chevrolet Corvette

Condition

Some owners may comment on erratic readings from the fuel gauge.

Cause

The sender wires from either tank may be trapped under the fuel or evaporator lines where the lines route between the body and the frame rail in the rear.

Correction

Inspect the area above for pinched wires. If the wires do not move freely, they may be pinched. The harness is # 1 in Figure 1.

Repair the wires as necessary. Make sure that the wires are properly routed, and move freely, to insure that they will not be pinched in the future. It may
be necessary to remove one or both fuel tanks for access to this area. If so, follow the procedures on Page 6-970 in the Service Manual.

Warranty Information

For vehicles repaired under warranty, use:

Labor Operation

Labor Time        

N6420

Use published labor operation time

73-83-15 > < Instruments - Fuel Gauge Responds Slowly After Fueling