Corvette V8-5.7L VIN G (1997)
Headlamp Control Module: Service and Repair
REMOVAL PROCEDURE
Headlamp Control Module Replacement: Removal Procedure
1. Open the hood.
CAUTION: Refer to Battery Disconnect Caution in General in formation.
2. Disconnect the negative battery cable.
3. Raise the RH headlamp manually. Turn the manual headlamp control knob counter clockwise.
4. Disconnect the RH headlamp wiring harness electrical connector from the forward lamp wiring harness.
Headlamp Control Module Replacement: Removal Procedure
5. Raise and suitably support the vehicle. Refer to Vehicle Lifting and Jacking in General Information.
6. Remove the front fascia lower closeout panel.
7. Release the brake caliper cooling duct from the front fascia, then reposition the duct
Headlamp Control Module Replacement: Removal Procedure
