Corvette V8-5.7L VIN G (1997)
Marker Lamp: Service and Repair
Parking/Turn Signal & Sidemarker Lamp (Assembly Replacement)
REMOVAL PROCEDURE
Parking/Turn Signal And Sidemarker Lamp (Assembly Replacement): Removal Procedure
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting and Jacking in General Information.
2. Remove the front fascia lower closeout panel.
3. Release the brake caliper cooling duct from the front fascia, then reposition the duct.
Parking/Turn Signal And Sidemarker Lamp (Assembly Replacement): Removal Procedure
4. Unhook the front turn signal lamp bracket retaining spring from the lamp bracket.
5. Unhook the lamp bracket retaining spring from the front fascia.
6. Remove the front turn signal lamp bracket retaining screws.
Parking/Turn Signal And Sidemarker Lamp (Assembly Replacement): Removal Procedure
7. Disconnect the sockets from the lamp.