Corvette V8-5.7L VIN G (1997)
11. Grasp firmly while pulling down with a twisting motion in order to remove the filter.
12. Remove the filter seal. The filter seal may be stuck in the pump, if necessary, carefully use pliers or another suitable tool to remove the seal.
13. Discard the seal.
14. Inspect the transmission fluid.
15. Inspect the transmission fluid filter. Pry the metal crimping away from the top of the filter and pull apart. The filter may contain evidence for root
cause diagnosis:
-
Clutch material
-
Bronze slivers indicating bushing wear
-
Steel particles
Important: Remove ALL traces of old gasket material from the transmission case and the oil pan gasket surfaces.
16. Clean the oil pan gasket mating surfaces, on both the transmission case and the transmission oil pan, with solvent and air dry.
INSTALLATION PROCEDURE
^
Tools Required:
-
J 36850 Transmission Assembling Lubricant (Transjel tm)
1. Coat the new filter seal with a small amount of J 36850 or equivalent.
