chevrolet Workshop Repair Guides

Chevrolet Corvette V8-57L Workshop Service and Auto Repair Manuals

All Technical Service Bulletins for Engine Control Module:|736513 > < PCM - Non Functional After Programming/No Start|Page 4654
Page 1
background image

Engine Control Module: All Technical Service Bulletins
Engine Controls - Various Driveability Conditions

File In Section: 8 - Chassis/Body Electrical 

Bulletin No.: 83-81-24

Date: March, 1998

Subject:
Various Driveability Conditions 
(Repair/Secure Wire Harness at PCM)

Model:
1997 Chevrolet Corvette

Condition

Some customers may report one or more driveability conditions which may or may not set a Malfunction Indicator Lamp (MIL) or a Diagnostic Trouble
Code (DTC).

Cause

The service loop of the wire harness for the PCM may be incorrectly routed. The harness may rub at the top front corner of the PCM (shown on Page
6-942 of the Service Manual, Volume 3). This condition was corrected in production in May, 1997 by adding additional conduit and improving the
harness routing.

Correction

Repair any chaffed or cut wires following the instructions in Section 8 of the Service Manual. Add additional tape or conduit to the wire in the damaged
area and secure the harness to prevent any further damage.

Warranty Information

For vehicles repaired under warranty, use:

Labor Operation

Labor Time

N6276

Use published labor
operation time

All Technical Service Bulletins for Engine Control Module:|736513 > < PCM - Non Functional After Programming/No Start|Page 4654