Corvette V8-5.7L VIN G (1997)
12. Install the fuel tank strap/shield.
13. Install the fuel tank strap/shield bolts.
13.1. Install the net hole bolt (3).
13.2. Install the slot location bolt (1).
13.3. Install the remaining bolts (2 and 5). Tighten the fuel tank strap/shield bolts to 25.5 Nm (19 lb. ft.).
14. Install the rear wheel and tire assembly.
15. Lower the vehicle.
16. Refill the fuel system.
17. Install the fuel filler cap.
18. Connect the negative battery cable.
19. Inspect for leaks.
19.1. Turn the ignition switch ON for 2 seconds.
19.2. Turn the ignition switch OFF for 10 seconds.
19.3. Turn the ignition switch ON.
19.4. Check for fuel leaks.
