Corvette V8-5.7L VIN G (1997)
Fuel Line Coupler: Service and Repair
With Plastic Collar
REMOVAL PROCEDURE
1. Grasp both sides of the quick-connect fitting. Twist the female connector 1/4 turn in each direction in order to loosen any dirt within the
quick-connect fitting.
WARNING: Wear safety glasses when using compressed air in order to prevent eye injury.
2. Using compressed air, blow any dirt out of the quick-connect fitting.
3. Squeeze the plastic retainer release tabs.
4. Pull the connection apart.
INSTALLATION PROCEDURE
WARNING: In order to reduce the risk of fire and personal injury, before connecting fuel pipe fittings, always apply a few drops of clean
engine oil to the male pipe ends. This will ensure proper reconnection and prevent a possible fuel leak. During normal operation, the O-rings
located in the female connector will swell and may prevent proper reconnection if not lubricated.
1. Apply a few drops of clean engine oil to the male fuel pipe end.