Corvette V8-5.7L VIN G (1997)
^
Refer to the Information Card included with the tool (and shown in the illustration) for the correct J 42236-A settings in order to access the
desired Class II module.
After Data Line Diagnosis or PCM Reprogramming
1.
Disconnect the J 42236-A and reinstall both shorting bars on to the splice packs. Both splice pack/star connector shorting bars are identical and
must be installed for proper vehicle operation.
2.
Check and clear all vehicle modules for trouble codes. Refer to SI in order to correct any trouble codes that may have been recorded prior to
diagnosis or reprogramming and are still present.
3.
Any trouble codes that may appear after diagnosis or reprogramming must also be diagnosed using SI.
Disclaimer
