Corvette V8-5.7L VIN G (1997)
Electrical Symbols (Part 10 Of 10)
Circuit Descriptions
The Circuit Description describes how the circuit works electrically. It details how power, ground, inputs, and signals are supplied to the related
components. The Circuit Description also explains the communication and interaction of all components that affect the operation of the system.
Connector End Views
Connector End Views show the cavity or terminal locations for all the related 2 pin or larger connectors shown in the system schematic(s). The drawings
show the connector faces as seen after the harness connector has been disconnected from a component or mating connector. Cavities that are not used are
left blank in the table.
In addition, the color and part number of the connector body is provided along with the family/series name.
If you need to backprobe a connector while it is on the component, the order of the terminals must be mentally reversed. The wire color is a help in this
situation. If there is more than one wire of the same color, you may need to locate a test point from its terminal number. A useful trick is to imagine that
you are probing a terminal from behind the page you are looking at. Then mentally locate that terminal with respect to the keyway or other reference
mark.
Diagnostic Tables
