Corvette V8-5.7L VIN G (1997)
Ignition Switch Lock Cylinder: Service and Repair
Ignition Switch Lock Cylinder
REMOVAL PROCEDURE
Ignition Switch Lock Cylinder: Removal Procedure
1. Apply the parking brake.
CAUTION: Refer to Battery Disconnect Caution in General information.
2. Disconnect the negative battery cable.
3. Remove the console.
4. Remove the I/P accessory trim plate.
5. Remove the driver knee bolster trim panel.
6. Remove the ignition switch lock cylinder electrical connector from the retaining tab on the ignition switch.
Ignition Switch Lock Cylinder: Removal Procedure
7. Disconnect the ignition switch lock cylinder electrical connector.
Ignition Switch Lock Cylinder: Removal Procedure
8. Insert the key and turn the ignition to RUN.
9. Using a flat bladed screwdriver or other suitable tool, depress and hold the ignition lock cylinder retaining tab (located on the RH lower side of the
ignition switch).