chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 259 > < Initial Inspection and Diagnostic Overview|Page 257
Page 5
background image

The following conditions may result in intermittent BCM operation with no DTC stored:

^

Any condition which results in the interruption of power to the BCM

^

The battery or ignition voltage is out of range (below 9.0 volts or above 16.0 volts).

^

A loose or damaged ground

^

An open or a short on the serial data line

Initial Inspection and Diagnostic Overview|Page 259 > < Initial Inspection and Diagnostic Overview|Page 257