Corvette V8-5.7L VIN G (1997)
3. Connect the inflatable restraint I/P module pigtail connector.
4. Install the Connector Position Assurance (CPA) to the inflatable restraint I/P module harness connector.
5. Install the I/P upper trim pad. Refer to IP Upper Trim Pad Replacement in Instrument Panel, Gauges and Console.
6. Enable the SIR system. Refer to Air Bag(s) Arming and Disarming.
TIGHTEN
Tighten fasteners to 10 N.m (89 lb. in).
Important Preliminary Precautions
CAUTION: When you are carrying an undeployed inflator module:
-
Do not carry the inflator module by the wires or connector on the inflator module.
-
Make sure the bag opening points away from you When you are storing an undeployed inflator module, make sure the bag opening
points away from the surface on which the inflator module rests.
When you are storing a steering column, do not rest the column with the bag opening facing down and the column vertical. Provide free space
for the air bag to expand in case of an accidental deployment. Otherwise, personal injury may result.
