Corvette V8-5.7L VIN G (1997)
Air Bag Control Module: Service and Repair
Frontal SIR System Remove or Disconnect
REMOVAL PROCEDURE
1. Disable the SIR system. Refer to Air Bag(s) Arming and Disarming.
2. Remove the accessory trim plate.
3. Remove the heater and A/C control head.
4. Remove the Connector Position Assurance (CPA) from the inflatable restraint Sensing and Diagnostic Module (SDM) harness connector.
5. Disconnect the SDM harness connector from the SDM.