Corvette V8-5.7L VIN G (1997)
Air Bag(s) Arming and Disarming: Service and Repair
Disabling the SIR System
1. Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
2. Turn the ignition switch to the OFF position.
3. Remove the key from the ignition switch.
4. Remove the front floor kick-up panel.
IMPORTANT: With the Sensing and Diagnostic Module (SDM) Fuse removed and the ignition switch in the ON position, The AIR BAG warning
lamp illuminates. This is normal operation, and does not indicate an SIR system malfunction.
5. Remove the SDM Fuse from the I/P fuse block.
6. Remove the sound insulator-LH.
7. Remove the Connector Position Assurance (CPA) from the driver yellow 2-way connector located at the base of the steering column.
8. Disconnect the driver yellow 2-way connector located at the base of the steering column.
