Corvette V8-5.7L VIN G (1997)
Clutch Switch: Service and Repair
Clutch Anticipate Switch Replacement
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Remove the LH I/P lower insulator panel.
3. Disconnect the clutch anticipate switch (cruise control release switch) electrical connector.
4. Remove the clutch anticipate switch (cruise control release switch) from the bracket.
INSTALLATION PROCEDURE
1. Install the clutch anticipate switch (cruise control release switch) to the bracket. Fully seat the switch to the bracket; audible clicks will be heard
while pushing the switch.
2. Connect the clutch anticipate switch (cruise control release switch) electrical connector.
3. Adjust the clutch anticipate switch (cruise control release switch). Grasp the clutch pedal and pull fully rearward against the pedal stop; audible
clicks may be heard as the switch moves into the adjusted position.