Corvette V8-5.7L VIN G (1997)
Transmission Position Switch/Sensor: Service and Repair
REMOVAL PROCEDURE
1. Raise and suitably support the vehicle.
2. Remove the intermediate exhaust pipe and allow the LH muffler assembly to hang down out of the way.
3. Shift the transmission into NEUTRAL.
4. Remove the nuts retaining the transmission shift control cable bracket to the transmission.
5. Disconnect the transmission shift control cable from the transmission range selector (shift) lever. Unsnap to release the cable.
6. Reposition the transmission shift cable and bracket.
7. Disconnect the park/neutral position switch electrical connectors.
