Corvette V8-5.7L VIN G (1997)
Positive: Service and Repair
REMOVAL PROCEDURE
Battery: Removal Procedure
1. Disconnect the negative battery cable from the battery.
2. Disconnect the positive battery cable from the battery.
3. Disconnect the positive battery cable from the underhood relay/fuse block connector.
Battery: Removal Procedure
4
Remove the battery hold down and bolt.
5. Remove the battery from the vehicle.
6. Remove the battery heat shield push-in retainers.
7. Remove the battery heat shield.
Battery Cable (Positive): Removal Procedure
8. Remove the upper clips from the battery cables.
9. Raise the vehicle and support.
10. Remove the RH HO2S from the exhaust manifold.