Corvette V8-5.7L VIN G (1997)
Battery Cable (Positive): Removal Procedure
4. Install the lower clip to the battery cables.
5. Install the RH HO2S to the exhaust manifold.
6. Lower the vehicle.
Battery Cable (Positive): Removal Procedure
7. Install the upper clips to the battery cables.
Battery: Removal Procedure
8. Install the battery to the vehicle.
9. Install the battery hold down and bolt
Tighten
Tighten the battery hold down bolt to 18 N.m (13 lb ft).
10. Install the battery heat shield.
11. Install the battery heat shield push-in retainers.