Corvette V8-5.7L VIN G (1997)
7.
Install the jumper wire terminal into cavity A6 of the BCM connector.
8.
Remove the Connector Position Assurance (CPA) clip from the back of the ECL relay connector.
9.
Remove the ECL relay harness from the backside of the relay assembly.
10.
Remove the relay.
11.
Remove the orange wire from position C1 on the ECL relay connector.
12.
Remove the white wire from position A2 on the ECL relay connector.
13.
Swap the two terminal positions and re-insert, orange wire to A2 and white wire to C1.
14.
Add the new purple wire from the jumper to terminal position B2.
15.
Install the new single pole, double throw relay.
16.
Install the Green 16-way connector to the BCM.
17.
Secure the BCM to the electrical panel.
18.
Tape the new purple wire neatly to another group of wires along it's path.
19.
Install the electrical center kick panel cover.
20.
Return to Step 25 under ECL Upgrade 1997, 1998 and 2000 Models with Manual Transmission or Export Vehicles.
