Corvette V8-5.7L VIN G (1997)
Steering Wheel: Service and Repair
Service Precautions
The SDM maintains sufficient voltage to cause a deployment for up to 10 minutes after any of the following conditions:
-
After the ignition switch is turned to OFF.
-
After the battery is disconnected.
-
After the fuse powering the SUM is removed. To avoid accidental deployment check the service procedure requirements for removal of the
AIR BAG fuse and disconnection of the deployment loops. To avoid the 10 minute time period refer to Disabling the AIR BAGS AND SEAT
BELTS System to disconnect the inflator modules from the deployment loops.