Corvette V8-5.7L VIN G (1997)
15. Install the transverse leaf spring onto the crossmember.
16. Install the transverse leaf spring anchor plates.
-
Tighten the transverse leaf spring anchor plate bolts to 50 Nm (37 ft. lbs.).
17. Remove tools J 33432-A and Adapters J 33432-97.
18. Connect the EBTCM to the crossmember. Refer to Brakes and Traction Control.
19. Connect the electrical connectors to the wheel speed sensors.
20. Install the transverse leaf spring mounting bolts.
21. Set the spring stud height to the measurement taken before removal.
22. Install the tire and wheel assemblies.
23. Remove the trans jack from the transaxle.
24. Lower the vehicle.
