Corvette V8-5.7L VIN G (1997)
Windshield (Long): Installation Procedure
24. Install the windshield upper and side garnish moldings.
Windshield (Long): Installation Procedure
25. Install the mirror.
26. Leave the windows open to avoid causing pressure when closing the doors which could cause a leak in the urethane adhesive.
27. Close the hood.
Windshield (Long): Installation Procedure
28. Install the roof lift off panel.
29. Allow the windshield urethane adhesive to cure.
Specifications
^
Minimum curing time is 6 hours
^
Optimum curing temperature is 22°C (72°F)
^
DO NOT use compressed air to dry (cure) urethane adhesive.
^
DO NOT drive the vehicle until the urethane adhesive is cured.
