Corvette V8-5.7L VIN G (1997)
Windshield Washer Reservoir: Service and Repair
REMOVAL PROCEDURE
Washer Pump/Reservoir Replacement: Removal Procedure
CAUTION: Refer to Battery Disconnect Caution In General Information.
1. Disconnect the negative battery cable.
2. Remove the washer solvent container retainer nuts.
3. Lift the washer solvent container from the wheelhouse.
4. Disconnect the electrical connector from the fluid level sensor.
Washer Pump/Reservoir Replacement: Removal Procedure
5. Disconnect the electrical connector and the washer hose from the washer pump.
Washer Pump/Reservoir Replacement: Removal Procedure
6. Drain the washer solvent from the washer solvent container.