Corvette V8-6.0L VIN U (2005)
Rear Bumper Reinforcement: Service and Repair
Impact Bar Replacement - Rear Bumper
Tools Required
J 42058 Frame Adapter Clamp
Removal Procedure
Caution: Refer to Approved Equipment for Collision Repair Caution in Service Precautions.
1. Disable the SIR system. Refer to SIR Disabling and Enabling Zones in Restraint Systems.
2. Disconnect the negative battery cable.
3. Remove all related panels and components.
4. Remove or reposition the wiring to avoid damage.
5. Repair as much of the damage as possible to the factory specifications.
6. Use J 42058 to secure the vehicle if pulling and straightening are required.
7. Note the location and remove the sealers and anti-corrosion materials from the repair area. Refer to Anti-Corrosion Treatment and Repair in Paint
and Coatings.
8. Apply heat and pry apart to separate the impact bar from the rear compartment panel.
