Corvette V8-6.0L VIN U (2005)
5. Slide the rearview mirror down onto the bracket.
6. Connect the electrical connector.
NOTE: Refer to Fastener Notice in Service Precautions.
7. Tighten the mirror tension screw.
Tighten the rearview mirror mount tension screw to 1.5 N.m (13 lb in).
8. Install the windshield side garnish moldings.
1. Position the side garnish molding behind the lock pillar molding and retainer.
2. Position the side garnish molding with its retainers to the holes in the windshield frame.
3. Push on the molding snapping the retainers into the windshield frame.
Mounting Plate - Roof Lift Off Panel Front Stowage
Mounting Plate - Sunroof/Moonroof Lift Off Panel Front Stowage