Corvette V8-6.0L VIN U (2005)
1. Remove the lift window strut.
2. Remove the seat belt anchor bolt from the seat.
3. Remove the seat belt escutcheon (1) from the trim panel.
4. Grasp the panel and pull outward disengaging the clips securing the panel from the vehicle.
5. Feed the seat belt through the opening in the panel.
6. Remove the panel from the vehicle.
Installation Procedure
1. Position the trim panel within the vehicle.
2. Feed the seat belt through the opening in the panel.
3. Push inward on the panel until the retaining clips engage securing the panel to the vehicle.
4. Install the seat belt escutcheon (1) in the trim panel.
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the seat belt anchor bolt to the seat.
