chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Antenna Replacement - Ignition Lock Key Transmitter - IP|Page 11887 > < Antenna - Keyless Entry|Diagrams|Page 11884
Page 1
background image

Antenna - Keyless Entry: Service and Repair
Antenna Replacement - Ignition Lock Key Transmitter - IP

ANTENNA REPLACEMENT - IGNITION LOCK KEY TRANSMITTER - IP

REMOVAL PROCEDURE

1. Open the instrument panel (I/P) compartment door.
2. Remove the trim bezel from the I/P compartment.

3. Remove the I/P antenna by pulling to disengage the antenna from the retaining bracket.
4. Disconnect the lead connector from the antenna wire harness.

INSTALLATION PROCEDURE

1. Position the antenna to the I/P carrier.
2. Connect the wire harness lead to the antenna.

Antenna Replacement - Ignition Lock Key Transmitter - IP|Page 11887 > < Antenna - Keyless Entry|Diagrams|Page 11884