Corvette V8-6.0L VIN U (2005)
1. Position the hinge to the stud plate on the body.
2. Install the nut attaching the hinge to the front of the body stud plate.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the folding top stowage lid hinge to body nut to 32 N.m (23 lb ft).
3. Install the hinge bolts to the lid.
Tighten the folding top stowage lid hinge to lid bolts to 25 N.m (18 lb ft).
4. Install the strut to the front ball stud on the hinge.
5. Remove the protective covering and the temporary support.
6. Lower and latch the folding top stowage lid.
7. Open the rear compartment.
8. Install the nut attaching the hinge to the rear of the body stud plate.
Tighten the folding top stowage lid hinge to body nut to 32 N.m (23 lb ft).