Corvette V8-6.0L VIN U (2005)
4. Using a metal inert gas (MIG) welder, weld a 51 mm (2 in) stitch along the tow hook to the impact bar in 4 places (1).
*
Front
*
Rear
*
Inboard side
*
Outboard side
5. Apply the sealers and anti-corrosion materials to the repair area, as necessary. Refer to Anti-Corrosion Treatment and Repair in Paint/Coatings.
6. Paint the repair area. Refer to Basecoat/Clearcoat Paint Systems in Paint/Coatings.
7. Install all related panels and components.
8. Connect the negative battery cable.
9. Enable the SIR system. Refer to SIR Disabling and Enabling Zones in Restraint Systems.