Corvette V8-6.0L VIN U (2005)
6. Install the disc brake caliper to the mounting bracket.
Notice: Refer to Fastener Notice in Service Precautions.
7. Install the disc brake caliper bolts.
Tighten the disc brake caliper bolts to 31 Nm (23 ft. lbs.).
Apply and release the brake pedal 3/4 stroke as many times as necessary in order to obtain a firm brake pedal.
Disc Brake Hardware Replacement - Rear
Disc Brake Hardware Replacement - Rear
Removal Procedure
Caution: Refer to Brake Dust Caution in Service Precautions.
1. Notice: Support the brake caliper with heavy mechanic's wire, or equivalent, whenever it is separated from its mount and the hydraulic flexible
brake hose is still connected. Failure to support the caliper in this manner will cause the flexible brake hose to bear the weight of the caliper, which
may cause damage to the brake hose and in turn may cause a brake fluid leak.
Remove the brake caliper from the mounting bracket and support the brake caliper (2) with heavy mechanic's wire (1), or equivalent; do NOT
disconnect the hydraulic brake flexible hose from the caliper.
2. Remove the brake pads (2) from the brake caliper bracket.
3. Remove the brake pad retainers (1) from the brake caliper bracket.