Corvette V8-6.0L VIN U (2005)
Parking Brake Cable: Service and Repair
Park Brake Cable Replacement - Front
Park Brake Cable Replacement - Front
Removal Procedure
1. Remove the park brake lever.
2. Raise and support the vehicle.
3. Remove the RH muffler.
4. Disconnect the rear park brake cables from the equalizer.
5. Disconnect the front park brake cable from the cable retainer.
6. Remove the front park brake cable bracket from the tunnel.
7. Lower the vehicle.
8. Remove the front cable from the vehicle
9. Remove the pass-through grommet and front bracket from the cable.
Installation Procedure
1. Install the front bracket and pass-through grommet to the cable.
2. Install the front park brake cable to the vehicle. Insure the pass-through grommet is properly installed.
3. Raise and support the vehicle.
4. Install the front park brake cable bracket to the tunnel.