Corvette V8-6.0L VIN U (2005)
Vacuum Brake Booster: Service and Repair
Vacuum Brake Booster Replacement
Removal Procedure
Caution: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the battery negative cable.
2. Remove the washer solvent container retaining nuts.
3. Lift the washer solvent container from the left wheelhouse.
4. Disconnect the electrical connections and the washer hose from the container.
5. Plug the washer pump outlet.
6. Disconnect the electrical connector (1) from the brake fluid level sensor.
7. Remove the nuts securing the master cylinder to the brake booster.
8. Remove the master cylinder from the brake booster without disconnecting the brake pipes and position the master cylinder aside.
