Corvette V8-6.0L VIN U (2005)
8.
Disconnect the electrical connector from the brake fluid pressure sensor.
9.
Depress the lock tab and release the cam (2) to disconnect the electrical connector from the EBCM (3).
10.
Remove the 4 EBCM-to-BPMV retaining bolts.
11.
Separate the EBCM (1) from the BPMV (2) by carefully pulling apart.
Installation Procedure
1.
Clean the sealing surface of the BPMV with denatured alcohol, or equivalent, and a clean shop cloth.
2.
Ensure the motor connector (3) is in place on the EBCM (1).