Corvette V8-6.0L VIN U (2005)
1. Install a new thermostat housing.
2. Ensure that the new thermostat housing has an O-ring seal and is in the groove correctly.
3. Install the water pump inlet (with thermostat).
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the water pump inlet bolts.
Tighten the water pump inlet bolts to 15 Nm (11 ft. lbs.).
5. Install the outlet hose to the water pump inlet.
6. Position the outlet hose clamp at the water outlet.
7. Fill the cooling system.