Corvette V8-6.0L VIN U (2005)
27.
Scribe or mark balancer orientation.
28.
Remove the crankshaft balancer bolt (139). Do not discard the crankshaft balancer bolt. The balancer bolt will be used during the balancer
installation procedure.
29.
Use the J 41816 (1) and the J 41816-2 (2) in order to remove the crankshaft balancer.
30.
Place the old and new balancers on the bench and orient them the same way (i.e. face up with a weight balance hole at 12 o'clock). Scribe/mark the
new balancer in the same location as the old balancer. Do not transfer weight pins on manual transmission equipped vehicles. Most vehicles will
be balanced without the use of any additional weight pins. Because some balancers may have spun on the crankshaft, transferring weight pins to
the same position would produce a random imbalance.
31.
Inspect for the following conditions:
