Corvette V8-6.0L VIN U (2005)
2. Apply a 5 mm (0.2 inch) bead of sealant GM P/N 12378190 or equivalent 20 mm (0.8 inch) long to the engine block. Apply the sealant directly
onto the tabs of the rear cover gasket that protrude into the oil pan surface.
3. Position the oil pan gasket 6 on the oil pan 5.
4. Using 2 bolts 4 to hold the oil pan gasket in place, install the oil pan assembly 5 and 6 to the engine block 7.
5. Finger tighten the 2 bolts 4 to hold the oil pan assembly 5 in place.
6. Notice: Refer to Fastener Notice in Service Precautions.
Install the mounting bolts 2, and 3, for the oil pan assembly.
1. Tighten the oil pan mounting bolts 2 M6 to 12 Nm (106 inch lbs.).
2. Tighten the oil pan mounting bolts 4 M8 to 25 Nm (18 ft. lbs.).
7. Reconnect the engine oil temperature sensor 3 electrical connector.
