Corvette V8-6.0L VIN U (2005)
Intake Manifold: Service and Repair
Intake Manifold Replacement
Removal Procedure
1. Important: The intake manifold, throttle body, fuel injection rail, and injectors may be removed as an assembly. If not servicing the individual
components, remove the manifold as a complete assembly.
Remove the engine sight covers.
2. Drain the cooling system.
3. Disconnect the electrical connector 1 for the fuel injectors.
4. Disconnect the electrical connectors 3 from the throttle body.
5. Disconnect the fuel feed for the fuel injectors.
6. Remove the vacuum hose from the brake booster.
7. Disconnect the electrical connector from the manifold absolute pressure (MAP) sensor.
8. Remove the MAP sensor (714).
9. Remove the grommet (715) from the sensor, as required.
