Corvette V8-6.0L VIN U (2005)
4. Notice: Refer to Fastener Notice in Service Precautions.
Install the intake manifold bolts (512) and fuel rail stop bracket (712).
1. Tighten the intake manifold bolts at first pass in sequence to 5 Nm (44 inch lbs.).
2. Tighten the intake manifold bolts at final pass in sequence to 10 Nm (89 inch lbs.).
5. Lubricate the manifold absolute pressure (MAP) sensor grommet (715) with clean engine oil.
6. Install the MAP sensor (714) and grommet (715).
7. Install the evaporative emission (EVAP) valve (730), bracket (741), and bolt (742).
