Corvette V8-6.0L VIN U (2005)
Exhaust Pipe/Muffler Hanger: Service and Repair
Exhaust Pipe Rear
Exhaust Hanger Replacement (Exhaust Pipe Rear)
Removal Procedure
1. Remove the catalytic converter.
2. Remove the upper exhaust pipe hanger bolts.
3. Remove the exhaust pipe hanger.
Installation Procedure
1. Install the exhaust pipe hanger.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the upper exhaust pipe hanger bolts.
Tighten the exhaust pipe hanger bolts to 50 Nm (37 ft. lbs.).
3. Install the catalytic converter.