Corvette V8-6.0L VIN U (2005)
Cabin Ventilation Grille: Service and Repair
Pressure Relief Valve Replacement
Removal Procedure
Important: The body pressure relief valve should be replaced whenever it is removed from the vehicle. Before installing the valve remove any
loose material from the edge of the body opening. If fraying has occurred apply an edge conditioner to bond the composite fibers together
before installing the valve.
1. Remove the rear storage area left rear corner carpet panel.
2. Pry the valve from the rear compartment side body panel.
Installation Procedure
1. Position the valve to the opening with the cloth flaps hanging down.
2. Snap the valve to the rear panel.
Push firmly at each of the four snap locations.
3. Install the rear corner carpet panel.