Corvette V8-6.0L VIN U (2005)
3.
Using a flat-bladed tool, carefully lift up the rear edge of the indicator bezel (1) from inside the storage compartment to release the two retainers
(2).
4.
Pull the bezel rearward and out.
5.
Disconnect the electrical connector from the indicator.
6.
Depress the tabs on each side of the indicator (2) and remove it from the bezel (1).
7.
Install the new indicator in the bezel and engage the tabs.
8.
Connect the electrical connector to the indicator.
9.
Position the bezel to the console and press firmly to engage the two retainers
10.
Close the storage compartment lid.
11.
Open the I/P compartment door and locate the inflatable restraint module off switch (1).
12.
Using a flat-bladed tool, carefully lift up the edge of the switch in order to release it from the compartment door.
Important:
