Corvette V8-6.0L VIN U (2005)
6. Remove the SDM fuse from the I/P fuse block.
7. Open the front hood, and remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Computers and Control Systems - 6.0L.
8. Locate both the right and left front end sensors, also known as the electronic frontal sensor (EFS) (1, 4).
9. Remove both the right and left connector position assurance (CPA) (3, 6) from the right and left front end sensor connector (2, 5).
10. Remove both the right and left front end sensor connector (2, 5) from the right and left front end sensor (1, 4).
ENABLING PROCEDURE
1. Place the ignition in the OFF position.
2. Connect both the right and left front end sensor connector (2, 5) to the right and left front end sensor (1, 4).
3. Connect both the right and left CPA (3, 6) to the right and left front end sensor connector (2, 5).
4. Install the air cleaner assembly.
